Avmor's Floor Care Training Guide
 

Floor Sealing and Floor Finishing

Avmor offers a complete line of high quality floor cleaners and restorers for daily cleaning. You can select the floor care system that best meets your needs.
Required Equipment
1. Wet Floor Sign
2. Gloves and Glasses
3. Measuring Cup / System
4. Vacuum Cleaner
5. Dust Mop
6. Putty Knife
7. Dust Brush
8. Dust Pan
9. Garbage Can
10. Automatic Vacuum Sweeper
11. Autoscrubber
12. Blue/Red Pads or Brushes
13. Wet Mop System

Cleaners:
   Dry Cleaning

Prepare your equipment. Always use a clean dust
mop, a clean wet mop and clean pads.


Prepare and inspect
the area you have to
clean and clear any clutter.



Thoroughly vacuum
all walk on/off entrance mats.




Dust mop floor, pick-up debris and remove gum and other adhesives with a putty knife.





Clean open floor
area with automatic
vacuum, pick-up debris and remove
gum and other adhesives.

Place
“Wet Floor” signs.

  Manual Wet Cleaning

Verify the cleaning plan for pads,
chemicals and dilutions.

Put on protective
clothing.



Mix desired Avmor
floor cleaner as
directed.


Prepare your clean
mops for today’s work.


Using a clean mop; mop floor using the
figure 8 method.


Pay attention to edges and around fixtures.


Tips & Tricks
  • With floors that have floor finish, use a neutral cleaner
    or a cleaner that does not have a pH higher than the
    floor finish.
  • Follow the floor cleaning system and the cleaning plan.
    Always measure and follow the indicated dilutions.
  • For non finished floors or difficult cleaning applications
    use an alkaline cleaner.
  • Proper floor cleaning includes under the mats.
    Roll them up when wet cleaning.
  • Dirt comes into the building just as easily as people do.
    Pay particular attention when cleaning all entrances.
  • Always use clean pads, mops and equipment to avoid the
    gradual build-up of dirt on your floor & in your floor finish.
  • Pay attention to high traffic lanes and frequently remove
    marks on the floor.











Change mop and mop water regularly when dirty.

Clean all equipment
thoroughly, store ready for next use.







   Automatic Scrubbing

Fill autoscrubber with fresh water and add correct amount of chemical. Verify that the pad/brush and
squeegee are clean and put them on the autoscrubber.







Scrub the floor with
overlapping passes.










Daily: Clean and turn
scrubbing pads. Clean squeegee and vacuum filter. Empty both solution tanks.








Plug in the autoscrubber to be
recharged. Verify
battery weekly.
 
Home | Floor Preparation & Floor Stripping | Floor Sealing & Floor Finishing | Daily Cleaning | Floor Maintenance | Top Scrub & Recoat | Product Listing | Contact us
Copyright ©2007 Avmor. All Rights Reserved.