Floor Maintenance
Avmor’s unique floor care maintenance treatments complement all types of floor finish.
They repair scratches, protect against scuff marks and secure the gloss and protection you want.
|
|
 |
 |
Spray Buff:
Restorer/Maintaine:
Floor Cleaner/Maintainer:
|
|
| Restoring
Check the floor and
check the maintenance schedule.
If required apply
Avmor floor restorer.
Verify that the
floor is clean
before you apply
restorer.
Once dust mopping and cleaning is
completed apply Avmor restorer
to floor using an autoscrubber or mop on process. Let dry before burnishing .
|
High Speed or Ultra High Speed (UHS) Burnishing
Once dust mopping
and cleaning is completed put the
appropriate floor pad on the machine.
Prepare your burnisher and mount appropriate clean burnishing pad to machine.
Starting along the baseboard at the furthest point from the door, push High Speed or Ultra High Speed (UHS) machine forward moving in a straight line and overlapping last pass.
When burnishing, do not stay on the same
area too long.
Turn or change pads as required. Burnish the floor to desired gloss.
Dust mop floor and verify that you have achieved the desired result.
|
 |
 |
Tips & Tricks
- Always dust mop and clean prior to burnishing to avoid scratches on floor surface.
- Be sure to use the correct Ultra High Speedpads with in-line burnisher (800 rpm to 3500 rpm).
- Check for dust after burnishing, it may be necessary to dust mop.
- Always use clean equipment, mops & pads.
- Clean your burnishing pads and equipment after each use.
|
|
|
 |
Spray Buffing
Once dust mopping and cleaning is completed prepare your spray buff
solution.
Use a red or white pad on a rotary buffing machine (up to 800 rpm).
Start in a 3’ x 3’ area.
Lightly spray AVMOR spray buff solution and move machine over sprayed area until dry and buffed.
Turn or change pads as required. Buff floor to a high shine.
|
|
