Biomor™ Industrial Degreaser and Concrete Cleaner

STATUS: Active

    

Option 1Option 2
Item #2326277001Item #N/A
Format4×3.78LFormatN/A
Weight16.33 kgWeightN/A
  • DESCRIPTION
  • USE DIRECTIONS
  • SDS & RESOURCES

BIOMOR INDUSTRIAL DEGREASER AND CONCRETE CLEANER is the next generation in professional strength equipment degreasing and hard surface cleaning. This NEW AND IMPROVED microbial formulation contains a proprietary blend containing bacterial spores that degrades and eliminates petroleum stains and other organic material from industrial equipment, railways, bilges, vehicles, parking lots, garage floors, industrial tools, as well as on concrete and asphalt surfaces. BIOMOR INDUSTRIAL DEGREASER AND CONCRETE CLEANER contains no petroleum distillates, no solvents, no phosphates and low VOCs (volatile organic compounds). BIOMOR INDUSTRIAL DEGREASER AND CONCRETE CLEANER is non-flammable and is a safer alternative to harsh caustic and acidic cleaners. Organic ingredients in this product are readily biodegradable in accordance with OECD 301 standard.

SHAKE WELL BEFORE USE. Do not mix the product with sanitizing agents.
Best results are seen when the area is kept wet as long as possible. Pre-test a small area first for colourfastness.
FOR GENERAL EQUIPMENT CLEANING
Do not pre-wet surfaces or use in direct sunlight on painted surfaces. Dilute 95 ml/l of water (12 oz/US gal) and clean the equipment surface as needed. Do not use on kitchen equipment surfaces that come in direct contact with food.
FOR HARD SURFACE CLEANING
FOR DAILY CLEAN UPS: Dilute 100-200 ml/l of water (13-26 oz/US gal), wet the surface first with water using a hand pump or pressure washer, then spray the area. Apply product “very wet” and allow it to work 20-30 minutes before
agitating and rinsing the surface. For residual cleaning, spray the area again and do not rinse. Keep the work site damp
during treatment and repeat as necessary.
FOR HEAVY DUTY STAINS: Dilute 500 ml/l of water (64 oz/US gal), wet the surface first with water and then spray the area. Apply product “very wet” and keep wet for 45 to 60 minutes for best results. Scrub the surface and rinse. For residual cleaning, spray the area again and do not rinse. Keep the work site damp during treatment and repeat as necessary.
PRESSURE WASHING/DEGREASING: Pressure wash heavy materials. Spray surface with a 50/50 solution and pressure
wash again from bottom up. Do not allow surfaces to dry.
RECYCLING: This product package including the container and shipping carton are all designed to be recycled.
Follow all Federal, Provincial and local regulations regarding waste disposal.

RECOMMENDED PRODUCT