LUX UHS Floor Finish

STATUS: Active

Option 1Option 2
Item #2386278001Item #2386334001
Format4X4LFormat1x20L
Weight17.42 kgWeight22.00 kg
SystemFree pourSystemFree pour
  • DESCRIPTION
  • USE DIRECTIONS
  • SDS & RESOURCES

Avmor’s LUX UHS FLOOR FINISH offers exceptional depth of gloss giving your floors a “wet look” shine. It provides superior durabilitys, and excellent detergent resistance. LUX UHS FLOOR FINISH has outstanding lay down gloss and is non-yellowing. It has has excellent scuff, black heel mark, and overall wear resistance. LUX has an extremely high level of resistance to a variety of detergent solutions. It is the floor finish of choice for the retail and supermarket environments, as well as building service contractors.

1- Remove the old floor finish completely using an Avmor Floor Stripper and rinse with water.
2- Once the floor is dry, apply up to 6 coats of LUX UHS FLOOR FINISH.
3- Allow to dry between 35 to 40 minutes between each coat.
4- Polish (1000-3000 rpm) using 3M 3500 natural blend tan pad or equivalent.
DAILY MAINTENANCE:
1- Dust mop the floor to remove dirt and grit.
2- Use a neutral cleaner with mop or auto-scrubber to remove soil.
3- When required use a burnisher (1000 - 3000 rpm), polish the floor to build shine, remove scratches, scuff marks or repair high traffic areas.
TOP SCRUB AND ADDITIONAL COATS:
1- Dust mop the floor to remove dirt and grit.
2- Dilute a deep scrub cleaner in mop bucket with low speed floor machine or auto-scrubbing machine.
3- Apply the solution to the floor.
4- Use a blue pad to remove old finish.
5- Pick-up the solution using a mop or vacuum.
6- Rinse with water, pick-up solution and let dry.
7- Once the floor is dry, apply 2 to 3 coats of LUX UHS FLOOR FINISH.
8- Let dry 30 minutes between each coat.
9- Polish (1000 - 3000 rpm) using a 3M 3500 natural blend tan pad or equivalent.

RECOMMENDED PRODUCT