PREMIERE Superior Floor Finish

STATUS: Active

  

Option 1Option 2
Item #2086278001Item #2086334001
Format4X4LFormat1x20L
Weight17.47 kgWeight22.06 kg
SystemFree pourSystemFree pour
  • DESCRIPTION
  • USE DIRECTIONS
  • SDS & RESOURCES

Avmor’s PREMIERE Superior Floor Finish offers high gloss, superior durability, and excellent detergent resistance and is well suited for low, periodic and high maintenance schedules. PREMIERE Superior Floor Finish has outstanding lay down gloss and gloss retention and it responds well to burnishing. It will maintain its gloss even in high traffic areas. It also has excellent scuff, black heel mark, and overall wear resistance. PREMIERE has an extremely high level of resistance to a variety of detergent solutions.

1- Completely remove old floor finish and sealer from the floor and rinse thoroughly. 2- Apply 2 coats of a floor sealer
3- When the floor is dry apply 2-6 uniform coats of PREMIERE Superior Floor Finish. 4- Allow 20-40 minutes drying time between coats. 5- Wait 24 hours before burnishing. 6- Burnish (1000 - 3000 rpm) for a “Wet Look”shine.
Daily Cleaning - Low Maintenance:
1- Dust mop the floor to remove dirt and grit. 2- Use a neutral cleaner with mop or auto-scrubber to remove soil. 3- When required use a burnisher (1000 - 3000 rpm), polish the floor to build shine, remove scratches, scuff marks or repair high traffic areas.
Periodic Maintenance:
1- Dust mop the floor to remove dirt and grit. 2- Use a neutral cleaner with mop or auto-scrubber to remove soil. 3- On a weekly basis, using a burnisher (1000 - 3000 rpm), polish the floor to build shine, remove scratches and scuff marks. 4- In high traffic areas, apply a coat of PREMIERE Superior Floor Finish or spray burnish using Avmor’s SIDEKICK Restorer.
High Maintenance:
1- Dust mop the floor to remove dirt and grit. 2- Use a neutral cleaner to remove soils. 3- Using a high speed burnisher (1000 - 3000 RPM), polish the floor to build shine, remove scratches, scuff marks and to polish the surface 3 - 6 times / week. 4- In high traffic areas, apply a coat of PREMIERE Superior Floor Finish or spray burnish using Avmor’s SIDEKICK Restorer.
Scrub and Recoat:
1- Dust mop the floor to remove dirt and grit. 2- Dilute Deep Scrub Cleaner in mop bucket with low speed floor machine or Auto-Scrubbing Machine. 3- Apply solution to floor. 4- Using a blue pad scrub floor to remove the top one or two layers of soiled finish. 5- Pick up dirty solution with mop or vacuum. 6- Rinse thoroughly and let dry completely before recoating. 7- When the floor is dry apply 2 to 3 uniform coats of PREMIERE Superior Floor Finish. 8- Allow 20- 40 minutes drying time between coats. 9- Allow 24 hours to cure. 10- Burnish (1000 - 3000 rpm) for a “Wet Look” shine.

RECOMMENDED PRODUCT