TF700 Instant Traction Floor Conditioner

STATUS: Active

Option 1Option 2
Item #2412277001Item #N/A
Format4 x 3.78 L (4 X 1 US Gallon)FormatN/A
Weight16.48 kgWeightN/A
SystemFree pourSystemN/A

TF700 Instant Traction Floor Conditioner advanced chemistry provides a one-step slip resistance enhancing treatment and cleaner in the same product. TF700 can be used on all types of flooring, including vinyl tile, sheet flooring, terrazzo, marble, quarry tile, blue stone, Mexican tile, ceramic tile, concrete, granite and sealed wood. At a higher recommended concentration, a single application of TF700 creates a micro-profile on any type of flooring, significantly increasing slip resistance characteristics. When used at lower concentrations, TF700 can be used to effectively clean all types of flooring in restaurants, cafeterias, food courts, restrooms, and entrances and walkways, while maintaining positive slip resistance characteristics. TF700 can be applied with either a mop or automatic scrubber and will not cause a build-up with routine use. Field use has produced an average increase in slip resistance of 0.1 SCOF (Static Coefficient of Friction) per application. TF700 helps any type of floor meet or exceed the slip resistance recommendations of the U.S. Occupational Safety and Health Administration (OSHA), National Floor Safety Institute (NFSI) and American National Standards Institute (ANSI).

TO INSTANTLY INCREASE SLIP RESISTANCE CHARACTERISTICS: Dilute 128 oz (3.78 L) of TF700 Instant Traction Floor Conditioner per gallon (3.78 L) of clean water (1:1). Apply the diluted solution using a mop and wringer bucket or plastic watering can, making sure to thoroughly and uniformly wet out the area to be treated. Work in manageable size areas to avoid the solution drying out. Allow the solution to stand and work for approximately 10-15 minutes. Remove the solution with a wet/dry vacuum, autoscrubber or mop and wringer bucket. Lightly damp mop the treated area with a solution of neutral cleaner or clean water.
FOR ROUTINE CLEANING: Dilute 4 oz (120 ml) of TF700 per gallon (3.78 L) of clean water (1:30). Apply the diluted solution with either an autoscrubber or by damp mopping using a mop and wringer system. In order to avoid redepositing soils when damp mopping, a two bucket system should be used (one contains the solution, the other, the soiled water). Allow the floor to dry.