ULTIMAXX Floor Finish

STATUS: Active

Option 1Option 2
Item #2359278001Item #2359334001
Format4X4LFormat1x20L
Weight17.37 kgWeight21.94 kg
  • DESCRIPTION
  • USE DIRECTIONS
  • SDS & RESOURCES

Avmor’s ULTIMAXX Floor Finish provides outstanding durability in low, periodic and high maintenance environments. It is urethane fortified and will achieve optimal results with less coats compared to other leading floor finishes. ULTIMAXX Floor Finish offers excellent gloss retention and responds well to burnishing. It provides excellent scuff, black heel mark, and overall detergent and wear resistance. ULTIMAXX is easier to strip and it will not yellow like conventional urethane fortified floor finishes.

1. Completely remove old floor finish and sealer from the floor and rinse thoroughly. 2. Apply a floor sealer, if required. 3. When the floor is dry apply 2-4 uniform coats of ULTIMAXX Floor Finish. 4. Allow 30-40 minutes drying time between coats. 5. Wait 24 hours before burnishing. 6. Burnish (1000-3000 rpm) for a “Wet Look”shine using a natural blend pad.
Daily Cleaning - Low Maintenance:
1. Dust mop the floor to remove dirt and grit. 2. Use an Avmor neutral cleaner with mop or auto-scrubber to remove soil. 3. When required use a burnisher (1000 3000 rpm), polish the floor to build shine, remove scratches, scuff marks or repair high traffic areas. Periodic Maintenance: 1. Dust mop the floor to remove dirt and grit. 2. Use an Avmor neutral cleaner with mop or autoscrubber to remove soil. 3. On a weekly basis, using a burnisher (1000-3000 rpm), polish the floor to build shine, remove scratches and scuff marks. 4. In high traffic areas, apply a coat of ULTIMAXX Floor Finish or spray burnish using Avmor’s ECOPURE EP85 SIDEKICK Restorer.
High Maintenance:
1. Dust mop the floor to remove dirt and grit. 2. Use an Avmor neutral cleaner to remove soils. 3. Using a high speed burnisher (1000-3000 RPM), polish the floor to build shine, remove scratches, scuff marks and to polish the surface 3-6 times / week. 4. In high traffic areas, apply a coat of ULTIMAXX Floor Finish or spray burnish using Avmor’s ECOPURE EP85 SIDEKICK Restorer.
Scrub and Recoat:
1. Dust mop the floor to remove dirt and grit. 2. Dilute EP89 deep scrub cleaner in mop bucket with low speed floor machine or autoscrubbing machine. 3. Apply solution to floor. 4. Using a red or blue pad, scrub floor to remove the top one or two layers of soiled finish. 5. Pick up dirty solution with mop or vacuum. 6. Rinse thoroughly and let dry completely before recoating. 7. When the floor is dry apply 1 to 2 uniform coats of ULTIMAXX Floor Finish. 8. Allow 30-40 minutes drying time between coats. 9. Allow 24 hours to cure. 10. Burnish (1000-3000 rpm) for a “Wet Look” shine.

RECOMMENDED PRODUCT