Sani Stuff Disinfectant and No Rinse Sanitizer

STATUS: Active

For SKU 2036259030 (2.8 L) we recommend purchasing this accessory kit 0000025027.

 
DIN:02293315

Option 1 Option 2
Item # 2036259030 Item # 2036278001
Format 2x2.8L Format 2x4L
Weight 6.1 kg Weight 8.87 kg
System Dilution Control System Free pour
• Excellent for industrial, institutional, hospital and food establishment
• Disinfectant
• No rinse sanitizer
• Mildewstat
• Will not harm hard non-porous surfaces, including metal and stainless steel
• Will not dull floor finish
• Deodorizes surfaces which are prone to odours caused by micro-organism
Consult product reference sheet for more information on its effectiveness.

NOTE: To avoid excess foaming, pour water first or place dilution control system as close to the side of the container being filled. This is a concentrate product: DO NOT USE UNDILUTED.
USE DIRECTIONS: Surfaces must be pre-cleaned before using this product. Prepare a fresh solution for each use.
DISINFECTION:
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 10 minutes.
3) Remove excess liquid.
For HIV-1 (Human Immunodeficiency Virus): Wear disposable latex gloves, gowns, mask or eye covering. Clean blood or body fluids from surfaces before applying Sani Stuff. Any materials used in the cleaning process that may contain blood or body fluids are to be disposed of immediately in accordance with local regulations for infectious materials disposal.
SANITIZATION (200 ppm):
1) Prepare a 200 ppm active quaternary solution.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 1 minute.
3) Remove excess liquid or air dry. NO POTABLE RINSE IS REQUIRED. This product is an effective sanitizer when diluted in water up to 650 ppm hardness (CaCO3).
MILDEWSTAT: Repeat application at weekly intervals or when mildew growth appears.
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding. Make sure to wet all surfaces completely.
3) Let air dry.

Dilution ratio  (1 part product : x parts water OR quantity of product / total quantity of solution)
Disinfection and mildewstat 1:182
5 ml / 946 ml
22 ml / 4 L
0.2 oz / 32 oz
1.1 oz / US gal
Disinfection (against HIV-1)  1:124
7.6 ml / 946 ml
32 ml / 4 L
0.3 oz / 32 oz
1 oz / US gal
Sanitization 1:500
1.9 ml / 946 ml
8 ml / 4 L
0.1 oz / 32 oz
0.3 oz / US gal

 

Safety Data Sheet
Technical Data Sheet
Product Reference Sheet
Kosher Certification
LONO: Letter of Non-Objection for food plants
Sani Stuff Technical Bulletin
Additional Parts for Foodservice Set2Clean
Set2Clean FAQ
Set2Clean Flyer