retention after repeated detergent scrubbing. EP82 exhibits exceptional leveling characteristics with no mop drag, resulting in fast surface coverage and maximum labor savings. High speed dry burnishing is highly recommended for optimal performance. EP82 is the floor finish of choice for high traffic locations. Excellent for vinyl composition, linoleum, sheet vinyl, concrete, terrazzo, quarry, Mexican tile and most resilient type flooring.
• Formaldehyde Free
• APE Free
• Metal Free
• Low VOC’s
• Low Odour
NOTE: Ensure adequate ventilation. Floor surface must be clean, dry and free of residue prior to applying EP82. When stripping is required,
choose a Green Seal® certified floor stripper.
1) On a stripped floor, apply 2-3 coats of EP82 with a clean synthetic finish mop or a microfiber mop or applicator system.
2) Allow each coat to dry completely, normally 30 minutes before recoating.
3) Apply additional coats depending on gloss expectations and traffic conditions.
4) Wait 24 hours before burnishing (1500-3000 RPM) to a “Wet Look” shine. To maintain: burnish the floor to remove scratches, scuff marks and to
harden the surface.
|Specific Gravity||1.006 – 1.046|
|pH||6.5 – 9.0|
|Refractive Index||26.0 – 29.0%|
|4 L (1.06 US Gallon) Coverage||186 – 232 m2 (2000 – 2500 ft2)|