ERADIK8-55 One-Step Disinfectant Cleaner and Sanitizer

NOTE: To avoid excess foaming, pour water first or place dilution control system as close to the side of the container being filled. This is a concentrated product: DO NOT USE UNDILUTED AND DO NOT MIX WITH OTHER CLEANERS.
Pre-clean heavily soiled areas. Prepare a fresh solution for each use or when it is visibly dirty. For surfaces and/or objects that may come into direct contact with children at the mouthing stage of development, a rinse with potable water is recommended. This product is not to be used as a sterilant/high-level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
DISINFECTION AND FUNGICIDE* (non-critical medical devices, equipment & non-porous hard surfaces):
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 5 minutes. *10 minutes are required against Trichophyton interdigitale (Athlete’s foot).
3) Remove excess liquid or let air dry. Food contact surfaces or item(s) require rinsing with potable water.
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1, Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV) SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS.
PERSONAL PROTECTION: Disposable latex or vinyl gloves, gowns, face masks or eye coverings as appropriate, must be worn during all cleaning of blood/body fluids, and decontamination procedures.
CLEANING PROCEDURE: Blood/body fluids must be thoroughly cleaned from surfaces and objects before application of the disinfectant.
CONTACT TIME: five minutes.
INFECTIOUS MATERIALS DISPOSAL: Any materials used in the cleaning process that may contain blood or body fluids are to be disposed of immediately in accordance with local regulations for infectious materials disposal.
MILDEWCIDE: Repeat application at weekly intervals or when mildew growth returns.
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for a minimum of 5 minutes.
ANIMAL PREMISES:
1) Remove all animals and feeds from area. Remove all heavy soil, such as urine and fecal matter, from surfaces and objects. Empty all feeding and watering appliances.
2) Dilute product.
3) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 5 minutes.
4) Ventilate area. Do not house animals or use equipment until product has dried. All surfaces and/or objects that are in contact with feed or drinking water should be rinsed with potable water before reuse.
SANITIZATION (non-food contact surfaces):
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 15 seconds.